Instrument pods

Status
Not open for further replies.
olympus

olympus

Joined
Aug 5, 2017
Messages
1,400
Country flag
Hi Gents, Do the washers that go onto the fork top tube bolts, go under the instrument pods or above them??...or are they above & below??
 
The washers go above the pod, and underneath the heads of the bolts.

Cheers,

cliffa
 
They go above the pods only there should be none under the pod
 
Thanks Gents,,, BTW am i correct rev counter on the left & speedo on the right...
And do the pods face straight ahead or inclined inwards
 
Hi olympus,

On the MK 3 you cannot get them to face directly forward. I filed the mounting holes into slots so i can rotate the clocks to face forward. ( can't do with clock that are out of rotation).
 
I'm thinking to swap speedo to right side as I find the cable is just a tad snug at bars straight ahead position and creates a bit of bend in cable path. The tacho cable also seems too long mounted on the right and has to form a large S bend to cope.
 
The cable runs. Aren't an issue as I'm fitting electronic units, I was asking the positioning purely for estetic reasons
 
Status
Not open for further replies.
Back
Top