Ap lockheed copy caliper

Status
Not open for further replies.

baz

VIP MEMBER
Joined
May 26, 2010
Messages
7,138
Country flag
Has anyone used the light weight alloy calipers that are usually for sale on eBay for about £130 as opposed to the £230 ish genuine AP racing calipers?
Are they any good? There's usually a reason why something is cheaper ! Cheers
 
“There's usually a reason why something is cheaper ! Cheers”

And it is more than likely not good.

That £100 saved won’t go far on a hospital bill or funeral.
 
“There's usually a reason why something is cheaper ! Cheers”

And it is more than likely not good.

That £100 saved won’t go far on a hospital bill or funeral.
That's what I was thinking!! Hence the question
 
Has anyone used the light weight alloy calipers that are usually for sale on eBay for about £130 as opposed to the £230 ish genuine AP racing calipers?
Are they any good? There's usually a reason why something is cheaper ! Cheers

One is sold by a highly regarded expert in the field, with a reputation to maintain.

The other is not I presume?
 
Don’t know anything about eBay knockoffs. I did use a Grimeca 2p copy of the Lockheed . No problems.
 
Don't critical motorcycle/car parts have to meet minimum industry (government regulating body) standards?
 
Yes, but If you are thinking CE approved no, however with no dust seal - track use only these days, as per the warning on the AP packaging.
 
Are they not made by Grimeca? (The replica)

Ok disregard, I see there is a Lochheed replica of unknown provenance. Grimeca is like 17 quid more, was thinking of putting one on the back wheel of a build, having 2 AP's on the front.
 
Last edited:
I thought I had read they were commissioned as AP forgot they had made them and stocks ran out despite there being a demand, after the copies appeared AP remembered and made more. Wassells may be the company that commissioned them.
 
Yes, but If you are thinking CE approved no, however with no dust seal - track use only these days, as per the warning on the AP packaging.
i have a pair of genuine AP racing calipers on the front of my triumph i use it all year round on the road ,never had a problem with them, i didn't fit them so didn't know there was a warning on the packaging! so now i have something else to worry about
 
I've also used the original AP calipers on several street bikes with absolutely no problems. No idea what the dust seal issue might be.

Ken
 
i have a pair of genuine AP racing calipers on the front of my triumph i use it all year round on the road ,never had a problem with them, i didn't fit them so didn't know there was a warning on the packaging! so now i have something else to worry about
Same on my T160, never had a issue with them, but to be fair never used in winter
 
I have just fitted three of the AP copy calipers to a T160 I'm building for a friend. They seem to be nicely made with good threads fit & finish, but without cutting one up to check the casting I can't say any more. Only time & use will tell. I have however used the Grimeca ones & they work well. The most annoying thing about this type of caliper is there are no anti rattle springs fitted as standard.
 
The replica AP items are identical to the AP item with the exception of the brand marks being deleted. So it is easy to tell what you have, even if you don't actually know where it was made.

There has always been a demand for thse calipers as they are use by a lot of classic racers on 2 and 3 wheel, so I would discount stories that AP weren't making any, there have been regular supplies of AP CP2696 over the last few years.

Apparently they are made on new tooling. I have one, but have yet to use it. Agree with Matchless that they look nicely made. Visual inspection alongside one of my CP2696 4 rib AP items says that externally it is a very good copy!

Before actually using it I anticipate purchasing a genuine AP seal kit and popping the pistons out for a further inspection! If the fitted seals are of a similar appearance and fit I would say it should be functionally good. But clearly others are using them now.

One of my bikes has a genuine period AP 3 rib item fitted to the rear and I was going to swap it out for the copy, and if I am happy with the fitted seals on the new caliper this one will get the new ones.

(I also have 3 copies of Honda CB500/Kawasaki round screw cap master cylinders purchased from David Silver. I have 3 race seasons on one with no issues regarding quality and have just fitted one to a road bike.)

On the Grimeca calipers, which are fit and function identical to the AP, but of differing form/appearance, I know several people racing with them who are very happy with performance. They use the same pads as the CP2696, may be a fraction heavier, but have a little more clearance to wheel spokes than the AP items.

By design they are a race caliper not a road caliper, but clearly there are a lot of the AP versions on the roads. Unless you are planning rides in all weathers and on salty roads, and you are prepared to strip and clean them occasionally I can't see lack of a dust seal being a problem. In fact on other Japanese road calipers I have used on road and track bikes over the years the crud build up behind the dust seals has actually been the main problem, causing sticky pistons.

Not having anti rattle springs doesn't worry deaf old racers much o_O
 
CE approval is a Euro conformity to ensure manufacturers have correct enviromental and health and safety process in place ? product groups requiring this do not include Automotive parts themselves
this covers things like electrical items gas appliances and machinery etc not automotive parts AP the manufacturer may have CE approval but that is for meeting the process criteria as a manufacturer operating with in the EU it is a requirement and there will be a disclaimer on the product regarding useage

the Globaly recognised automotive quality managment is TSI 16949 .2016 and QS9000 if these are held by the manufacturer ( CE ) Euro approval is only relevant to the manufacturing process

i have used the AP replica calipers and some brembo replicas on a porsche 911 which bear the same manufacturers signature these have been sucessfully stopping a 911 from 150mph for the past two years without issue and were 25 percent of the purchase price of genuine Brembo
 
CE is also self certified, the manufacturer who adds CE mark to his item is supposed to have done the required testing and has kept the results in an accessible location for inspection. There is no requirement for the testing to be done independently so the process is open to abuse evidenced by all the mobile phone chargers that self combust.
 
Status
Not open for further replies.
Back
Top