- Joined
- Apr 2, 2013
- Messages
- 749
I saw this picture of the Goldstar rim in the For Sale section here. I was under the impression WM2 was 1.85"
WM2 rim size.
- Thread starter Mark Savage
- Start date
- Status
- Joined
- Apr 2, 2013
- Messages
- 749
It must be, I just find that confusing when WM2 size is referred to as being 1.85" sometimes and then...not.
- Joined
- May 7, 2005
- Messages
- 7,163
WM2 is 1.85" but that is a reference to the inner width where the tyre sits only but there are other sizes, I have a flanged alloy WM2 rim and I will measure the outside width tomorrow, would not surprise me if it is 2.5"
www.devonrimcompany.com
WM2 (1.85) WIDE STAINLESS STEEL RIMS
WM2 (1.85) WIDE STAINLESS STEEL RIMS - WM2 (1.85'') Dunlop style Rolled edge ''DEVON'' Mirror Stainless
www.devonrimcompany.com
Onder
VIP MEMBER
- Joined
- May 11, 2010
- Messages
- 4,264
Measured mine but it is 18" however the rest of the markings are the same.
The total width at the widest external points is 2 5/8" My guess is the inside
bead where the tyre would sit is at or less than 2 1/4". Since it has a tyre mounted
no way I can say for sure.
The total width at the widest external points is 2 5/8" My guess is the inside
bead where the tyre would sit is at or less than 2 1/4". Since it has a tyre mounted
no way I can say for sure.
- Joined
- Apr 2, 2013
- Messages
- 749
That's why I said I find it confusing to see WM2 (2.5) stamped in the rim.
Yes, it is the outside rim measurement, I checked.
- Status
