Who resleeves master cylinders in AUS ?

Status
Not open for further replies.
P

petejohno

Joined
Jul 24, 2009
Messages
93
I have managed to get a gimeca front caliper and an 12'' RGM disc for my MK111 and would like to get the original lockheed master cylinder re-sleeved as everyone seems to suggest. Does anyone know who can be relied on to do the job properly in Australia ? Prefer east coast.
Johno
 
petejohno said:
I have managed to get a gimeca front caliper and an 12'' RGM disc for my MK111 and would like to get the original lockheed master cylinder re-sleeved as everyone seems to suggest. Does anyone know who can be relied on to do the job properly in Australia ? Prefer east coast.
Johno
Click to expand...

Johno,

Its deadset easy. Buy one of the sleeve kits and have a local fitting shop do it. Instructions come with the kit. Talk to RGM if you dont have the kit.

I have the drill and tap if you need to borrow it.

Cheers
 
petejohno said:
I have managed to get a gimeca front caliper and an 12'' RGM disc for my MK111 and would like to get the original lockheed master cylinder re-sleeved as everyone seems to suggest. Does anyone know who can be relied on to do the job properly in Australia ? Prefer east coast.
Johno
Click to expand...

Halray or
BHSS
 
Most of the brake shops for motorcars can arrange for resleeving. I've had two Lockheed racing master cylinders done . Just chuck them on the counter and go back a week later with your $50.
 
Thanks Fellas,
I make a few phone calls. Just noticed my LHS switchgear is damaged, so I may go down the path of a new modern master cylinder with new switch gear.

Regards Johno
 
petejohno said:
Thanks Fellas,
I make a few phone calls. Just noticed my LHS switchgear is damaged, so I may go down the path of a new modern master cylinder with new switch gear.

Regards Johno
Click to expand...

The Sparx ones aren't too expensive. Or find a used Lucas.
 
Status
Not open for further replies.
Back
Top