VIP Photo Contest - Racing Commandos

Photo contest

Status
Not open for further replies.
Here is a photo from my California days. I am almost certain that it's the exit of the banked turn at the old Riverside Raceway (a photographer walked up to me at the next AFM race and handed me a slide saying "I took this at the last race and wanted to share it with you"). The race before this one, a fairing mount had failed from a fatigue-crack at Ontario and when I looked at the one on the other side, it was also cracked, so I took it off (I have an "AMA" fairing) and put a front number plate. That "single race" expedient became preserved for history (although I like the look of the clean bike in the photo).
This motorcycle has what I think is the first "John Baker" hopped-up 850 engine (if not the first, it's almost certainly the oldest surviving one). I had a 72 750 Combat roadster and after almost 10,000 miles on the road and some pretty intense club racing, the engine appeared to be absolutely solid and the Service Department offered me a swap -- my "unbroken" Combat 750 for teardown and analysis for an 850 assembled from Experimental shop parts. John and I built up this engine from December 72 until about February 73. It was his experiment in head work and bottom end preparation for a go-faster 850. It also happened that Service Dept. had a complete PR chassis kit that was donated (I love the Isolastic head steady). The glassfibre bits were special ordered for me from RGM in red gel coat.


Oh, hell. How ITF do I get the photo to show up without having to click on the link ????
Not sure about Google photos, but in Google drive, you just "Right Click" on the image, choose "Get shareable link" then copy and paste that link into your post.

Hope that helps.

cliffa.
 
Oh, hell. How ITF do I get the photo to show up without having to click on the link ????

Display the Google photo (or any internet photo) on your screen. Double left click on the photo. Then right click and look for "copy image address" and click on it. Find the "insert image" button in the accessnorton thread header (or use Ctrl+P) and paste in the address. Hit the "preview" button to check before posting.

VIP Photo Contest - Racing Commandos
 
Last edited:
Here is a photo from my California days. I am almost certain that it's the exit of the banked turn at the old Riverside Raceway (a photographer walked up to me at the next AFM race and handed me a slide saying "I took this at the last race and wanted to share it with you"). The race before this one, a fairing mount had failed from a fatigue-crack at Ontario and when I looked at the one on the other side, it was also cracked, so I took it off (I have an "AMA" fairing) and put a front number plate. That "single race" expedient became preserved for history (although I like the look of the clean bike in the photo).
This motorcycle has what I think is the first "John Baker" hopped-up 850 engine (if not the first, it's almost certainly the oldest surviving one). I had a 72 750 Combat roadster and after almost 10,000 miles on the road and some pretty intense club racing, the engine appeared to be absolutely solid and the Service Department offered me a swap -- my "unbroken" Combat 750 for teardown and analysis for an 850 assembled from Experimental shop parts. John and I built up this engine from December 72 until about February 73. It was his experiment in head work and bottom end preparation for a go-faster 850. It also happened that Service Dept. had a complete PR chassis kit that was donated (I love the Isolastic head steady). The glassfibre bits were special ordered for me from RGM in red gel coat.


Oh, hell. How ITF do I get the photo to show up without having to click on the link ????

That's cool. What year was that? I started racing with an original PR that I bought from Dan Gurney. My first race was at Riverside in 1972 or 1973, with AFM, and I raced there regularly for quite a few years. I really liked the track, except for the boilerplate wall in turn 9, but the track surface eventually degraded so much it wasn't quite as much fun any more.

Ken
 
My race bike, built 2013 was a shabby 1973 Roadster, Madass tank was intended for a cafe racer, engine has Maney cases, one piece crank, JS pistons rods and cam ,FA head Mk 2 34 mm Smoothbore Amals, RCR crank ignition, 40 mm belt primary.
5 speed TTI g/box 18" rims for a better tyre choice NZ built 2 into 1 EX . JS fork bushes, Lansdowne internals, rear shocks are IKON
Avon tyres.Initially ran it on Avgas, now on 98 pump fuel. Modified rear hub from a standard item to accomodate sprocket changes
Standard Commando frame.
IMG_2038.jpg
IMG_2040.jpg
 
That's cool. What year was that? I started racing with an original PR that I bought from Dan Gurney. My first race was at Riverside in 1972 or 1973, with AFM, and I raced there regularly for quite a few years. I really liked the track, except for the boilerplate wall in turn 9, but the track surface eventually degraded so much it wasn't quite as much fun any more.

Ken

Thanks to Ken, Cliff, and Jim for the info on posting photos on this forum.

Ken, I left Duarte about two weeks after "Bi-Centennial"4th of July of 1976 to go back to England to work on the Rotary Project so I'm thinking that this was taken in the first half of 1976. I had seen very few PRs in any color than yellow so I was highly impressed with your green PR. I managed to get in races at Riverside, Willow Springs, and Ontario (and the fuzzy brain is saying "somewhere else" but I can't remember where). There was AFM and another organization putting on races in SoCal -- I enjoyed living, working, and racing in CA, although the atmosphere around Duarte was terribly dire by then.
One weekend, I went to a NASCAR race at Riverside and the layout of the track started to make more sense. I would guess that that kind of use contributed to the damage and deterioration of the track surface. I'd never ridden on any track quite like Riverside -- that long back straight into the banked turn with the "boilerplate" was a real thrill.
Thanks for the kind response. Good to hear from you again. BH

VIP Photo Contest - Racing Commandos
 
Last edited:
This is a Commando racer photo I took at the AHRMA race at Miller Motorsports Park in 2012, but I don't recall who the owner was.

View attachment 16526

Ken

Hi Ken,

This is Dennis Donahoe's Commando, based out of Salt Lake City, UT. If I'm not mistaken, he's running a Featherbed Commando nowadays, not unlike your beautiful machine.

-Kenny
 
Hi Ken,

This is Dennis Donahoe's Commando, based out of Salt Lake City, UT. If I'm not mistaken, he's running a Featherbed Commando nowadays, not unlike your beautiful machine.

-Kenny

Thanks, Kenny. I'm so used to the bike Dennis has been running for the last few years that I forgot about the Commando. I should probably post a picture of the featherbed in the other thread, but I was a little embarassed that I'd forgotten the name of the gentleman who built and originally raced it, and then became sick and let Dennis ride it. I met both of them at the races several times, and both were pretty cool folks.

Ken
 
Thanks to Ken, Cliff, and Jim for the info on posting photos on this forum.

Ken, I left Duarte about two weeks after "Bi-Centennial"4th of July of 1976 to go back to England to work on the Rotary Project so I'm thinking that this was taken in the first half of 1976. I had seen very few PRs in any color than yellow so I was highly impressed with your green PR. I managed to get in races at Riverside, Willow Springs, and Ontario (and the fuzzy brain is saying "somewhere else" but I can't remember where). There was AFM and another organization putting on races in SoCal -- I enjoyed living, working, and racing in CA, although the atmosphere around Duarte was terribly dire by then.
One weekend, I went to a NASCAR race at Riverside and the layout of the track started to make more sense. I would guess that that kind of use contributed to the damage and deterioration of the track surface. I'd never ridden on any track quite like Riverside -- that long back straight into the banked turn with the "boilerplate" was a real thrill.
Thanks for the kind response. Good to hear from you again. BH

VIP Photo Contest - Racing Commandos

Wow, you remembered it when it was green and gold. I'm impressed. It wasn't that color very long. I painted it several different colors when I first got it, mostly after a crash on the track, but finally settled on something close to the original yellow. Dan had painted it purple! He said he did it so the police wouldn't notice it as much.

The other racing organization you're probably thinking of is ARRA (America Road Racing Associaton). They were running races at Willow back then.

I haven't been able to identify you by memory (what I have left of it) and your initials, but we were clearly in some of the same races, so I have to ask your name.

Ken
 
Yes, I was impressed. At the time, everyone in the Duarte race shop (mechanics and riders) were absolutely certain that anything green on a racing motorcycle was terribly bad luck and there you were with flashy green! It was a good time. My name is Bruce Henderson. I was only around there for nearly a year and a half, but there are still some great memories.
 
Yes, I was impressed. At the time, everyone in the Duarte race shop (mechanics and riders) were absolutely certain that anything green on a racing motorcycle was terribly bad luck and there you were with flashy green! It was a good time. My name is Bruce Henderson. I was only around there for nearly a year and a half, but there are still some great memories.

Thanks, Bruce. It's really nice to hear from you. I also have some great memories from those early days. I do remember someone telling me that green was an unlucky color for a race bike, but I guess Kawasaki never got the message. In the '70s I painted the PR silver, green, red, and finally back to yellow. I continued to race it up to the early '90s, but eventually sold it when I retired in '93. The friend I sold it to restored it, and it is now in a private museum. I still get to visit it every year or so.

Ken
 
Status
Not open for further replies.
Back
Top