Reply to thread

I put a Pazon in a Victor and it's doing peculiar things.  I've installed plenty of Pazon and Boyer ignitions.  I static timed it as usual, 30 degrees, red dot in the window.


When it fired up the timing was way out.  It started easily and idled but choked when I opened the throttle.  As I tried to time it with a timing light it ran worse as the two timing marks tried to align.   I double checked the rotor mark and the pin in the primary case.  They are accurate.  So what gives?  I pulled the amal apart and replaced the needle jet.  Also tried the needle in all three positions.


Back
Top