Hi,
First time poster so please forgive my lack of knowledge! I’ve just bought the bike which was manufactured in 2014 and then put on display in an air conditioned office ever since. It has 5 miles on the clock (factory road test?) and has never been ridden or registered. It is in perfect condition and I’ve all the books/receipts and completed SVA (?) paperwork. I’m sure registering it will be a pain and I know I think it will need an MOT and insurance.
Reading about the potential issues I am going to check every fastener on the bike for the correct torque and try to preempt problems by
1.Fitting a primary breather kit if I can find one or make my own using the existing bolt if possible
2.Checking/changing starter motor and rocker cover gaskets (Any ideas where to get these)
3.Change the relays for Honda ones, not sure how many I need?
4.Change all fluids /oil and filter
5.Fit in line filter/valve thingy to oil feed (any recommendations?)
6. Change tyres and inner tubes (not sure of the sizes of the inner tubes or any recommended makes?)
Is there anything else I need to get me going? It has a new battery and runs quite quietly with the short exhausts.
I paid £7k for it including a brand new genuine Aluminium tank so I’m happy to take a risk with the potential problems.
Any help/thoughts would be greatly appreciated as I’m a car person and my current bike is a 2 stroke Greaves TFS so a little bit different other than maybe the oil leaks.
Thanks
David
First time poster so please forgive my lack of knowledge! I’ve just bought the bike which was manufactured in 2014 and then put on display in an air conditioned office ever since. It has 5 miles on the clock (factory road test?) and has never been ridden or registered. It is in perfect condition and I’ve all the books/receipts and completed SVA (?) paperwork. I’m sure registering it will be a pain and I know I think it will need an MOT and insurance.
Reading about the potential issues I am going to check every fastener on the bike for the correct torque and try to preempt problems by
1.Fitting a primary breather kit if I can find one or make my own using the existing bolt if possible
2.Checking/changing starter motor and rocker cover gaskets (Any ideas where to get these)
3.Change the relays for Honda ones, not sure how many I need?
4.Change all fluids /oil and filter
5.Fit in line filter/valve thingy to oil feed (any recommendations?)
6. Change tyres and inner tubes (not sure of the sizes of the inner tubes or any recommended makes?)
Is there anything else I need to get me going? It has a new battery and runs quite quietly with the short exhausts.
I paid £7k for it including a brand new genuine Aluminium tank so I’m happy to take a risk with the potential problems.
Any help/thoughts would be greatly appreciated as I’m a car person and my current bike is a 2 stroke Greaves TFS so a little bit different other than maybe the oil leaks.
Thanks
David