Schwany
VIP MEMBER
- Joined
- Apr 22, 2020
- Messages
- 3,823
I get a dribble out of my TTI gearbox after a ride. I do not put the bike up on a center stand, and my portable stand won't fit where I park the bike in its hidey hole in the garage. Side stand is on a block and the bike is almost straight up when parked. Oil is filled to midway up the kickstart shaft. My rear chain is not run tight ever and neither is my clutch belt.
Anyway, does anyone know the specs for the seal for the case behind the sprocket? Since TTI and the people that sell their gearboxes do not provide a damn bit of information about TTI gearboxes (to me anyway), I'm going to call it a sleeve gear or mainshaft seal. I sent a request to TTI asking about the seal, but I probably won't hear back for a month or possibly never. It's race season and they are probably busy.
Edit: Vaughan at TTI got back to me with the seal spec information I needed.
Anyway, does anyone know the specs for the seal for the case behind the sprocket? Since TTI and the people that sell their gearboxes do not provide a damn bit of information about TTI gearboxes (to me anyway), I'm going to call it a sleeve gear or mainshaft seal. I sent a request to TTI asking about the seal, but I probably won't hear back for a month or possibly never. It's race season and they are probably busy.
Edit: Vaughan at TTI got back to me with the seal spec information I needed.
Last edited:
