tm34 throttle tube

Status
Not open for further replies.
S

seaguy

Joined
May 19, 2009
Messages
271
Country flag
Can anyone tell me if a angled throttle cable tube is. Needed for smooth op and clearance ?
 
No , you can use either - i had the curved throttle adjuster in the top of my TM, but when i switched to a straight pull throttle assembly the cable that came with it was shorter ( by shorter i mean the total length of the cable that extends beyond the cable housing) so i switched to the straight short throttle cable adjuster

i've used bot but sometimes like i siad the premade cables lengths are slightly different and its best to have both types in the tool box to set them up properly

seaguy said:
Can anyone tell me if a angled throttle cable tube is. Needed for smooth op and clearance ?
Click to expand...
 
mikegray660 said:
No , you can use either - i had the curved throttle adjuster in the top of my TM, but when i switched to a straight pull throttle assembly the cable that came with it was shorter ( by shorter i mean the total length of the cable that extends beyond the cable housing) so i switched to the straight short throttle cable adjuster

i've used bot but sometimes like i siad the premade cables lengths are slightly different and its best to have both types in the tool box to set them up properly

seaguy said:
Can anyone tell me if a angled throttle cable tube is. Needed for smooth op and clearance ?
Click to expand...
Click to expand...
if you don't mind my asking ... What air filter will fit in there. I got a cone type since they are cheap but wondering now if there is room for the length if the carb is on a 2into1 manifold.
 
Status
Not open for further replies.
Back
Top