Timing and drive side oil seal dimensions

Status
Not open for further replies.
Joined
Apr 21, 2015
Messages
315
Country flag
Hi, can anyone please give me the driving and timing side oil seal dimensions, David
 
Drive side is 30 X 45 X 5 mm. There is no timing side seal.
 
Thanks for that, when I say timing side, I mean the seal in the timing cover, David
 
Measured an old timing cover seal, 1 1/16" OD 1/2" ID but shaft it runs on is 9/16" width 3/16"

So the seal ID you order depends on if its based on the unfitted ID or the shaft size its designed to seal.
 
04.8023 https://andover-norton.co.uk/en/shop-details/15173/crankshaft-oil-seal-t-s-d12-913-nmt2124-

Picture from Andover:

Timing and drive side oil seal dimensions
Looks like they are supplying metric ones these days.

NAK
SC (this is the lip type)
13.89 (inside diameter in mm)
28.99 (outside diameter in mm)
4.8 (width)
 
NAK
SC (this is the lip type)
13.89 (inside diameter in mm)
28.99 (outside diameter in mm)
4.8 (width)

I have one of these seals in a bag marked 04-8023

The 28.99 is actually 26.99 so matches the imperial dimensions I gave. Needed some strong reading glasses to ensure the 6 was a 6 and not an 8.
 
Status
Not open for further replies.
Back
Top