The runt seal

Status
Not open for further replies.
Davo

Davo

Joined
Jun 30, 2009
Messages
85
Country flag
Could one of you learned folks identify this little fellow.
He came in an RGM engine and gearbox gasket and seal kit.
Approx 5mm diameter.
Where the blazes does it go? (And no rude replies please! :D )

The runt seal
 
gidday Davo
possibly the O ring that goes on the gearbox ratchet spindle. ratchet spindle O ring 040079. 3/32" x 1/32" .
hope this helps.
Bradley
 
Too small for that. One of the other seals in the kit matched the spindle seal.
 
If not the special factory option of O ring for clutch push rod drool, its likely as earlier ID'd above:
Ratchet Spindle 0 ring pn 040079 Group 6 plate no. 9
 
It's a Concentric carb throttle stop or pilot air adjuster screw O-ring. (Amal part 622/082) :)
 
Yes, it's likely a carb ring, which means another customer is missing one ? I got a set of A65 pushrods in one big order so sent 'em back.
 
L.A.B is onto it I think. Here it is beside it's bigger brothers, a couple of tacho drive seals.
Having one little seal left over at the completion of my rebuild would haunt me. :D
Thanks!!!

The runt seal
 
Status
Not open for further replies.
Back
Top