- Joined
- Aug 11, 2003
- Messages
- 32
My bike is a 1974 MK11A and i've decided to overhaul the back end while the winter is here but how do you remove the swinging arm spindle.
The handbook tells you to remove the end cap rod and then the cap.
The rod is shown on the parts list but the caps at both sides are blank. There is also no sign of a grease (oil) nipple
One cap is only just below the surface and the other just under an 1/8" below.
Who can help?
Jim
The handbook tells you to remove the end cap rod and then the cap.
The rod is shown on the parts list but the caps at both sides are blank. There is also no sign of a grease (oil) nipple
One cap is only just below the surface and the other just under an 1/8" below.
Who can help?
Jim