- Joined
- Sep 24, 2010
- Messages
- 530
Was having a close inspection of the swing arm ( the bit the rear wheel bolts into ).
The holes that the rear shock bolt onto, the hole on the LH side is 3/8 (near the sprocket) and the RH hole is pretty close to 1/2 inch ?.
Is this correct ( I wouldn't imagine so....) ?.
The holes that the rear shock bolt onto, the hole on the LH side is 3/8 (near the sprocket) and the RH hole is pretty close to 1/2 inch ?.
Is this correct ( I wouldn't imagine so....) ?.