- Joined
- Jul 10, 2004
- Messages
- 12
Installing the rear wheel of my Commando is really difficult. I have to pry the swing arm open to install the tire, speedo drive and spacer.
I have to pry it open about a quarter inch to get the spacer in.
I measured the inside opening at the very end of the swing. It measures 7 & 7/8 inch.
Does anyone have one to measure?
Thanks
I have to pry it open about a quarter inch to get the spacer in.
I measured the inside opening at the very end of the swing. It measures 7 & 7/8 inch.
Does anyone have one to measure?
Thanks