Ron Hulton
VIP MEMBER
- Joined
- Jul 18, 2005
- Messages
- 292
![Canada Country flag](https://www.accessnorton.com/images/flags/shiny/32/Canada.png)
I had used a 36mm Mikuni on my MK111 for two years without any issue until last year. My problem now is a sticky residue being left on the forward face of the slide and carb body causing the slide to stick . If you look in the carb manifold you will notice the sticky brownish substance . The only change from the previous years was a fibreglass Interstate tank which i had refurbished using POR 15. The POR had cured for over 3 weeks before any gas was added to the tank .
Looking for ideas . Thanks in advance.
Looking for ideas . Thanks in advance.