Special Battery terminal washers needed

I'm in need of six of these side relieved brass washers. They ship with many NAPA, Deka and other powersports batteries. Only needed in some side terminal applications.
I had packratted a few, but I need more to compensate for the poor engineering on these silencer flange welds.
So, if you have them laying about, destined to be tossed out by your heirs, I'd like them please.
I'll pay shipping.
Please and thank you!

I can look around tomorrow. Might have a few although I think these are usually with Motobatt batteries and I have not particularly had good luck with Motobatts so don't use them much. Won't have 6 though.

Easy enough to make from a washer, and I'd use stainless steel for your silencer application.

JD

jaydee75 said:

Easy enough to make from a washer, and I'd use stainless steel for your silencer application.

JD

Click to expand...

I can build a Space Shuttle in a bit over 20 minutes.

Just using stuff already made. Not retired yet, not enough time for things.... a fabricator my whole life. Gone is the joy of accomplishment forming metal.



Thank you!

I already made TEMPORARY spacers from M6 DIN washers, cut, cold galvy. Stacked 2X. "Ghetto" AF