1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Spacer between head stock bearings

Discussion in 'Norton Commando Motorcycles (Classic)' started by olympus, Mar 9, 2019.

  1. baz

    baz VIP MEMBER

    Joined:
    May 26, 2010
    On my A10 from memory it has a split pin to stop the nut from coming off but nothing to actually keep the nut tight, so I see what you mean,
    I made a tool to fit the crankshaft nut with a 1/2" socket welded to it ,I tighten this with an air spanner to make sure it's tight
    Apologies to the original poster for getting off track
     
  2. olympus

    olympus

    Joined:
    Aug 5, 2017
    If any one else is deciding to replace the single ball bearing set up in the headstock for sealed bearings. and you find the spacer to be too short. a replacement is available from RGM Pt. No. 100006
    Fitted it yesterday & is spot on:)
     

Share This Page