So how do I install my new isos?

Old Britts

Debbie, look here ttp://207.57.8.201/ob_start.html If you are installing this kit to a Pre-MK3 Commando, you will need to replace the Front Engine Mount (06-1410) with the MK3 Front Engine Mount (06-5510) or modify your existing mount. This picture shows the Pre-MK3 mount on the bottom and the MK3 mount on the top. To modify the pre-Mk3 mount, mill the ends down so they stick out .250" on both sides. The stock mount sticks out .350" on the left and .610" on the right. We also have a limited supply of reconditioned mounts (06-5510/A) that have been milled and black powder coated. Ask us about a rebate on your old mount when you buy one of our reconditioned mounts.

The one I have is Norvil's new kit that does not require modifying the front mount (unlike the Andover Norton kit).

The trouble I was having was with the rear mount anyway. It looks like the front might actually fit, but I don't think I'm going to bother trying to install it. I'll just use the Hemmings collars and the stock rubbers and spacers.

Debby