Yes I upgrade and then post some pictures. thx for the response!
shifting issues
- Thread starter k110linde
- Start date
Ok got back into it this weekend. Rechecked the selector forks, and they were good. The gear dogs were smooth.i
Checked the spacer on the mainshaft behind the cassette and it was in the proper location. Moving the main shaft forwards and backwards does put it in to gear.(video attached) also a clip of the external shaft mechanism play. I installed new clutch plates and springs but the clutch lever was very tight and I can't select any gears. Stripped it back down - video of shifting mechanism
Checked the spacer on the mainshaft behind the cassette and it was in the proper location. Moving the main shaft forwards and backwards does put it in to gear.(video attached) also a clip of the external shaft mechanism play. I installed new clutch plates and springs but the clutch lever was very tight and I can't select any gears. Stripped it back down - video of shifting mechanism
- Joined
- Jan 16, 2015
- Messages
- 6,023
Clutch lever very tight ? Do you mean the lever can’t be pulled in (locked solid ) ?
No just difficult to pull the lever in. I measured the new stack of plates and is the same as the old ones. The springs are 52mm
