- Joined
- Apr 2, 2008
- Messages
- 492
So L.A.B., then should raise approximately 89mm for a stock 850 and 80mm if it is a short stroke; correct?
Yellow_Cad said:One other question: On these short stroke Commandos you are seeing photos of, do they have the 850 style crossover exhaust pipes?
Yellow_Cad said:All three numbers (plate, motor, and gearbox) all match (235565)
Yellow_Cad said:4) There is smaller than normal (not much space at all) space between the top fin on the barrels and the lowest fin on the head
Unlike Ron L said there should not be a visibly smaller spacing between the last cylinder fin and the first head fin as the RH7 head isn't milled to achieve a higher compression
Yellow_Cad said:I was a tooling machinist for a lot of years, I have stamped a lot of things and seen a lot of things stamped, and I don't have any doubts that these numbers were done by the factory. Out of curiousity, I will email the sources you suggest L.A.B. and send them the link to this post with a question from me to them. I'll let you know what I find out.