rgm clutch

seattle##gs · Mar 5, 2021

Unable to get much info directly from RGM and Clubman Racing is no more. My question: will stock Norton parts fit into the RGM belt drive basket? especially the diaphragm spring and the circlip.

RoadScholar · Mar 5, 2021

I'd be surprised if the parts weren't compatible. See if you can copy and paste the image to this thread, sharp eyes and members with RGM parts experience should know.

There is at least one telling piece, and that is, if RGM offers a clutch stack specifically for that basket/hub you may not get the compatibility you seek. I fit the Many belt drive to one of my builds with no compatibility issue

Best.

dynodave · Mar 5, 2021

Sure they accept stock parts. However stack height tuning helps usability. I have 2 HTD/norvil and 2 AT10/RGM belt drives under the NHT engine table. I'm not sure which I will use on the 88SS clone. For the featherbed the belts are narrower and longer.

seattle##gs · Mar 5, 2021

I think the parts are compatible though the diaphragm seems to be very snug so perhaps a little metal will need to be removed.

EstuaryBoy · Mar 5, 2021

I bought one new from RGM a few years back and yes, all the OE parts fitted fine (Mk3 plates et al)

ashman · Mar 5, 2021

Yes they do.

City Garage · Mar 5, 2021

I would recommend the Barnett set of disk but the stock does work. Clubman usually provided instructions

https://s3-eu-west-1.amazonaws.com/rgmnorton/fs/pdf/belt_drive_instructions.pdf

seattle##gs · Mar 5, 2021

Thanks, all. problem solved.

rgm clutch

Similar threads