Relacing the front disc wheel

Hi All.
I have some problems to relacing the front disc wheel.
I have:
-10 spokes with angle 90 degree;
-10 spokes with angle 100/110 degree about.
These two set of spokes have the same thick and lenght.
More:
-10 spokes with angle 90 degree;
-10 spokes with angle 100/110
These two other set are thin than first set and longer of abot 10mm the 90 degree and 7,5 mm the 100/110 degree.
Please where they go to the hub?.
Thank you.
Piero

I know the spokes are different, side-to-side. The spokes on the rotor side are thicker gauge and have larger nipples to go with them.

The thicker short spokes go to the disc side as they end up nearly vertical, the longer thinner ones go on the non disc side.

Best you post a pick of the angles as your 100 is in relation to what Datum, my data has 90 degree and 80 degree bends and your 80 may be 100.



Set I have with the 4 spokes shown and labelled

First one is cropped but its the disc side outer



















http://vintagebikemagazine.com/technica ... m-06-1951/

http://www.oldbritts.com/lacing_info.html