So while shopping online today, i realized the pipes on my 73 750 are the belled MKIII style, without a cross pipe. Here's a photo of the three pieces that came out when i took it apart, the collet's i know, but whats the other part? Is it OK to use this style on a 750, with 750 nuts, and the collets? or should i buck up and buy some new 750 style pipes (i was looking online because mine are a bit worn out looking, when i noticed mine were "wrong")
Questions about exhaust pipes
- Thread starter kevbo82
- Start date
- Status
- Joined
- Nov 20, 2004
- Messages
- 20,124
kevbo82 said:
The item on the left is the spherical seating for Mk.3 pipes which goes into the head first and is used in place of the pre-Mk.3 crush washer, the Mk.3 collets also have a slight chamfer to fit the Mk.3 flared pipe end.
http://www.oldbritts.com/nor_mk3_75_26.html
http://www.oldbritts.com/1975_g26.html
Note that the item numbers (31 & 32) are swapped over in the parts books.
- Status