Outer primary cover

NORTSTER1974

NORTSTER1974

VIP MEMBER
Joined
Aug 17, 2015
Messages
437
Country flag
Is the outer primary cover from a 69 70 model the cone shaped one compatible with a 71 to 74 model? If so does it use the same timing plate which is installed by two Hammer screws. Does it clear the footrest mount on a 71 to 74 model? Thanks for your input.
 
Yes, the cone primary will work on the 71-74 models. They should clear the footrest mount, but since the '68-'69 footpeg studs are welded into the footrest mount while the 71-74 are screwed in with a locknut, you may need to trim the footpeg stud and use a thinner locknut or eliminate the lock nut and use some blue loctite.
 
Ron L said:
Yes, the cone primary will work on the 71-74 models. They should clear the footrest mount, but since the '68-'69 footpeg studs are welded into the footrest mount while the 71-74 are screwed in with a locknut, you may need to trim the footpeg stud and use a thinner locknut or eliminate the lock nut and use some blue loctite.
Click to expand...
Thank you Ron, I always like the look of them things.
 
Hard to find a good used one that is not punched. At one point they were no longer available new. Not sure if that has changed.
 

Attachments

  • Outer primary cover
    primary.jpg
    51.3 KB · Views: 76
No one that I know of. I believe it was only a couple model years maybe 69 and 70. Lab would know. So anything you find would be used.
 
According to the '68 - '70 parts list the outer chaincase changed after serial 131257.

Norvil lists 060370 so it's possible they have them at £308.

The Norvil Motorcycle Company supply spares, accessories and parts for Norton and Norvil bikes

Norvil Motorcycle Co Ltd manufacture & sell Norton spares for pre 1977 Nortons
www.norvilmotorcycle.co.uk

It looks like the early cover uses a different timing plate 060662.

andover-norton.co.uk

Andover Norton - IGNITION TIMING DEGREE SCALE (1968 COMMANDO) - 06.0662

IGNITION TIMING DEGREE SCALE (1968 COMMANDO)
andover-norton.co.uk






​
 
L.A.B. said:
According to the '68 - '70 parts list the outer chaincase changed after serial 131257.

Norvil lists 060370 so it's possible they have them at £308.

The Norvil Motorcycle Company supply spares, accessories and parts for Norton and Norvil bikes

Norvil Motorcycle Co Ltd manufacture & sell Norton spares for pre 1977 Nortons
www.norvilmotorcycle.co.uk

It looks like the early cover uses a different timing plate 060662.



[td]060370[/td][td] OUTER - EARLY 1968 POICHAINCASENTED TYPE - NOT FLAT[/td][td]C - - -[/td]
[td]
308.00​


​
Click to expand...
Thank you oh great one!
 
Stephen Hill said:
Andover also lists the part number for the "old" cover, but the link takes you to the "new" cover.
Click to expand...
Yes Stephen, it appears like the only folks who might have one are Norvil, according to LAB. I scored the one in the picture on Ebay. It was less than half of what Norvil wanted. To me it was just on the list of oddities that I have for my Norton. Like a Drouin, 16" rear wheel, 21" front wheel , multiple fuel tanks, etc..
 

Similar threads

tribonnie
Outer Primary Cover
Replies
0
Views
237
tribonnie
tribonnie
MikeG
Inner primary cover
Replies
16
Views
1,349
MikeG
MikeG
B
Leaking Primary Cover
Replies
11
Views
1,198
ashman
ashman
mean gene
  • Discussion Discussion
Commando Inner/outer primary for belt
Replies
0
Views
313
mean gene
mean gene
S
clearance primary cover to Z plate
Replies
7
Views
813
seattle##gs
S
Back
Top