Oil pump worm gear and camshaft nut torque settings?

Can't find them in my manual, what do you guys set your camshaft nut and worm gear at?

Matt

Very tight, but don't strip them. You don't want them coming apart, so a dab of blue loctite wouldn't hurt anything.

These bikes were largely built to feel, every nut did not have a torque value. Not having stood on the line building the bikes, use good judgement before reefing on these nuts. Sorry there is no definte answer.

Greg

Cam chain adjuster nuts and oil pump stud nuts are 15 ft. lb. each? if that's what you need.........


Tim_S

Thanks Tim, but I was talking about the larger nuts on the end of the camshaft and the worm gear on the crankshaft. I nipped them up really tight anyways, without loctite...should be okay.

Matt