• Thread starter Thread starter Unclviny
  • Start date Start date
  • "/>

    Odd bolt source

    Joined
    Jul 31, 2009
    Messages
    738
    Folks,
    I need (for another project):
    M10 X 1.5, stainless steel, button or allen head, LEFT hand thread
    And I cannot find any, if I need to buy a bunch I will.

    Any idea's?

    Vince
     
    I put Albert-clone mirrors on my /5 BMW and the stock mirror holes bother me so I want pretty bolts to fill the holes, one hole is M10 X1.5 standard but the other one is M10 X 1.5 LH thread.

    Vince
     
    Why not find a bigger bolt you like and thread the holes to match :?: Or just as a machinist to make plugs you can just glue in with silicone :?:

    Jean
     
    I am pretty sure that the Japanese threads are 1.25 and I do not want to make any changes that can not be undone.

    My "plan B" is to fill the holes with silicone and a small diameter SS button head with an AN washer stuck in the silicone, I was just hoping someone knows where to get the bolts.

    Vince
     
    I found the bolt:
    SS, allen head, LH thread, M10 X 1.5 X 20, $13.88! but for that kind of $ I will go with "plan B".

    The bolt is at www.ballerbolt.com, thet have some VERY cool dress-up bolts in Titanium, Aluminum and SS.

    Vince
     
    Unclviny said:
    I found the bolt:
    SS, allen head, LH thread, M10 X 1.5 X 20, $13.88! but for that kind of $ I will go with "plan B".

    The bolt is at http://www.ballerbolt.com, thet have some VERY cool dress-up bolts in Titanium, Aluminum and SS.

    Vince

    Did you think it was going to be less than that? :mrgreen:
     
    For a 20 MM allen head, my guess was that it would be sky-high price-wise (I would have paid about $7 or $8), but $14 + shipping?!, no way!!

    Vince
     


    Write your reply...
    Back
    Top