lcrken
VIP MEMBER
- Joined
- Mar 15, 2009
- Messages
- 5,035
While sorting out bent fork tubes on my 2014 961 Commando here,
www.accessnorton.com
I acquired the parts list and spec sheet for the traditional/conventional/RWU Ohlins forks. Richard-7 posted them for the USD forks, but I haven't seen them here for the RWU forks, so I'm posting them below:
Ken
Wheel Alignment on my 961.
After my crash back in March, with subsequent repairs, the bike just didn't feel right at the front end. So I decided to check the front and rear wheel alignment. I'd not previously checked it, just making sure that the distance from end of swingarm to axle slider was the same on both sides...
www.accessnorton.com
I acquired the parts list and spec sheet for the traditional/conventional/RWU Ohlins forks. Richard-7 posted them for the USD forks, but I haven't seen them here for the RWU forks, so I'm posting them below:
Ken