Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
triple johnThe washers aren't shown in the later model manuals so I suppose they can be left off?An easy way to fit the stud nuts (as demonstrated by the late John Hudson in the NOC engine strip/rebuild video) is to wind some turns of thin string or cord around them (noting the rotation) put them in position, with a finger on the head to hold them square then pull the string and that should (hopefully!) wind the nut right up.
triple john
The washers aren't shown in the later model manuals so I suppose they can be left off?
An easy way to fit the stud nuts (as demonstrated by the late John Hudson in the NOC engine strip/rebuild video) is to wind some turns of thin string or cord around them (noting the rotation) put them in position, with a finger on the head to hold them square then pull the string and that should (hopefully!) wind the nut right up.
