New Website

Status
Not open for further replies.
Great looking website and great looking exhaust systems also. Isn't the shipping prohibative for supplying those in the USA.
 
By Global standards shipping out of New Zeaqland is quite cheap.
For example to ship a pair of Commando header pipes to the US would be NZ$130.00, US$66.00
A 2 into 1 with muffler would be NZ$175.00, US$89.00.
The exchange rate is quite favourable at present, certainly way better than a few months ago !

Regards

Paul.
 
Great site, pipes and mufflers too. Have you ever made a two into one into two system before? Like that of the Dunstall. I may want to replace mine and or put this on my Commando as well.
 
Nice site. Great pipes!

Prices in $NZ look scary, might help to post $US.

Kber45
 
Dunstall 2 into1 into 2

Just last year I re-produced the Dunstall 2 into 1 into 2 header pipe, so I now have that "on my books"
As we speak a gentleman in the US is sending me his Dunstall centerstand so that I can reproduce that.
I've just now added this pipe to my website http://www.vikingexhaust.com/getPart.asp?id=85
These are the only photo's that I have so far, but will update this as I get new ones.

Cheers

Paul.
 
NZ$ Pricing and Currency Converter

Regarding the NZ$ pricing, thats why there's a currency converter on the site.
I sell through out the USA, U.K. across Europe, Australia and even make a few sales here in NZ.
It's easier to have the currency converter than to try and list everything in many different currencies.

Cheers,

Paul.
 
Hi Paul ~

Blokes I bought one of Paul's "big Bore" zorst sets for the Trident .. and it is a work of art... superb ~

New Website


A mutual friend of mine and Paul's here in Ozz reckons I should put the following encounter on my Resume after Paul, Phil Pick, myself, and Steve Kelly ( Tri_Spark Ignitions ) were asked to judge the bikes at Triples Down Under 1 ~

(That aside Paul needs/ ed money to buy new T-Shirts ~ LOL :D )

New Website
 
Paul, do you make high pipes for Triumphs? I'm working on a hard tail build and need some high pipes. Not sure if I'm looking for both on the right or the left yet. You don't do stainless yet do you?
 
T shirt and Hi pipes

Coco, that "T" shirt was the very first Triumph "T' shirt I ever bought.
I bought it in 1972, I was still at school !
many a Woman has tried to throw it out over the years, don't know why !!!it's still perfectly alright .... from "Triumph up ! :p
And hey, it still fits !

Regarding Hi level pipes, I have here in the workshop a T140, T150, T160, RIII and Commando engine frames and ancillary bits that I use to build one off pipes etc on.
Drop me a mail with some photos of what you have and what you would like to have, we can work iot out and make it happen.

Oh, and hey Stuart, that is a great photo aye :)

Cheers,

Paul.
 
Paul, I love the shirt. I have a "holey" t-shirt myself that my girl friend will have to pry from my cold dead hands.

I'll gather some exhaust photos and get them to you soon
 
Paul do work with brushed stainless? And if so could you do a 2 into 1 for a Commando and the silencer in stainless? Really great looking products! It would be in 1 5/8" tube. Thanks and have a great day, Chuck.
 
Hi Chuck, Sorry I don't work in stainless at all.
I have had much experiance in another Industry working with Stainless years ago, but at this stage I don't have a TIG unit.

As you will see on my site on this page, http://www.vikingexhaust.com/getPart.asp?id=43 I do make the 1 5/8" pipes, just not in stainless.
www.hpcoatings.com does do an "Aluminiumised" coating see this photo of a MkIII with Big Bore Hi-level "S" model pipes, http://www.vikingexhaust.com/getPart.asp?id=19 this has this coating, not the same as brushed stainless of coarse, but an option.

Cheers,

Paul.
 
Re: Dunstall 2 into1 into 2

Paul Bryant said:
Just last year I re-produced the Dunstall 2 into 1 into 2 header pipe, so I now have that "on my books"
As we speak a gentleman in the US is sending me his Dunstall centerstand so that I can reproduce that.
I've just now added this pipe to my website http://www.vikingexhaust.com/getPart.asp?id=85
These are the only photo's that I have so far, but will update this as I get new ones.

Cheers

Paul.
Click to expand...

Upon veiwing this page of the website it states: 2into 1 into 1. Is this in error? I would like to see the section that goes from 1 into 2.
 
Opps ! my mistake, I've just corrected that !

Also have added a photo of the rear section.
Again this is polished, but as yet not chromed.

Paul.
 
Re: NZ$ Pricing and Currency Converter

Paul Bryant said:
It's easier to have the currency converter than to try and list everything in many different currencies.
Click to expand...

Google has a new currency converter feature that is quite ingenious... Type what you want to convert, say "20 pounds to dollars" or "200 new zealand dollars to us dollars" in your google search bar, the conversion using today's prices will show up above the search results. Works for all major currencies... found this extremely handy when ordering parts from overseas.

- HJ
 
Great stuff, quality looks excellent. How much time does it take to get the welds looking so good Paul.

Let me know how you get on with the centre stand too please. I could use one!
 
Status
Not open for further replies.
Back
Top