Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Normal
Going to give a go at making them. I thought about using Yamabond, but i don't want to have to take it off again if that doesn't work. The gaskets he provides suck IMO which is a shame because his stuff is quality and to cheap out on a gasket is quite frankly head scratching. You'd think if someone is willing to spend $30 dollars and an hour+ out of their day to make a gasket vs use one of yours than maybe customers would be willing to spend an extra $5-$10 for your part with a better gasket. I would.Here's his gasket. It tore just by looking at it. And the holes are smaller than the bolts which also tears them and bunches it up[ATTACH=full]101616[/ATTACH]
Going to give a go at making them. I thought about using Yamabond, but i don't want to have to take it off again if that doesn't work. The gaskets he provides suck IMO which is a shame because his stuff is quality and to cheap out on a gasket is quite frankly head scratching. You'd think if someone is willing to spend $30 dollars and an hour+ out of their day to make a gasket vs use one of yours than maybe customers would be willing to spend an extra $5-$10 for your part with a better gasket. I would.
Here's his gasket. It tore just by looking at it. And the holes are smaller than the bolts which also tears them and bunches it up
[ATTACH=full]101616[/ATTACH]
