New posts

Reply to thread

Message

They are long, but thinner than the bullet connectors. Do you know of any connector that is thinner and shorter? They are also easy to de-pin

I also moved this mess inside the headlight, and the flasher unit, and a bunch of diodes. I also have a lot of ground and power connections. Think there's a better way to wire these, but i'll save that for another day (it all works )

[ATTACH=full]97136[/ATTACH]

I was able to tie it up a little.

[ATTACH=full]97137[/ATTACH]

Only issue i have now is the bezel doesn't seem to want to fit on the shell. The shell seems wider. It's a new headlight shell and bezel.

<blockquote data-quote="TomU" data-source="post: 588926" data-attributes="member: 7984">They are long, but thinner than the bullet connectors.&nbsp; Do you know of any connector that is thinner and shorter?&nbsp;&nbsp; They are also easy to de-pinI also moved this mess inside the headlight, and the flasher unit, and a bunch of diodes.&nbsp; I also have a lot of ground and power connections.&nbsp; Think there&#039;s a better way to wire these, but i&#039;ll save that for another day (it all works <img src="https://cdn.jsdelivr.net/joypixels/assets/8.0/png/unicode/64/1f642.png" class="smilie smilie--emoji" loading="lazy" width="64" height="64" alt=":)" title="Smile&nbsp; &nbsp; :)"&nbsp; data-smilie="1"data-shortname=":)" />)[ATTACH=full]97136[/ATTACH]I was able to tie it up a little.&nbsp; [ATTACH=full]97137[/ATTACH]Only issue i have now is the bezel doesn&#039;t seem to want to fit on the shell.&nbsp; The shell seems wider.&nbsp; It&#039;s a new headlight shell and bezel.</blockquote>

[QUOTE="TomU, post: 588926, member: 7984"] They are long, but thinner than the bullet connectors. Do you know of any connector that is thinner and shorter? They are also easy to de-pin I also moved this mess inside the headlight, and the flasher unit, and a bunch of diodes. I also have a lot of ground and power connections. Think there's a better way to wire these, but i'll save that for another day (it all works :)) [ATTACH type="full"]97136[/ATTACH] I was able to tie it up a little. [ATTACH type="full"]97137[/ATTACH] Only issue i have now is the bezel doesn't seem to want to fit on the shell. The shell seems wider. It's a new headlight shell and bezel. [/QUOTE]