Wanted to put in a fuse block. I liked the Fuzeblocks FZ-1, but didn't like the way the wires entered and exited, plus i think it was sold out at the time, so i went with a Rowe PDM-60 (i added the deutsch connector)
[ATTACH=full]96723[/ATTACH]
Now where to put it? I wanted to put it in the battery box, but wires were going in the wrong direction where i wanted to mount it, so i decided to put it on the rear mudguard support bracket. Only problem was the bracket was not as wide as the PDM. I was just going to zip tie it, but that looks like crap and it didn't hold it very securely. So out with the band saw and metal brake to fab up a wider bracket
[ATTACH=full]96721[/ATTACH]
And added rivet nuts to hold it down
[ATTACH=full]96722[/ATTACH]
Installed
[ATTACH=full]96724[/ATTACH]
Only problem is you need access to the back to reprogram the unit and the nut on the timing side will be buried under the oil tank. So fingers crossed i've got the trip amps correct.
