New posts

Reply to thread

Message

The main issues are low compression on the right cylinder, melted wiring, and frozen front caliper and MC. Not sure about the gearbox.

Pulled the head off (which was somewhat easier than the oil tank/horn, but not by much). I fear putting it back won't be near as easy

Carbon fouled...

[ATTACH=full]16547[/ATTACH]

Gasket looks ok

[ATTACH=full]16548[/ATTACH]

Pistons are fouled as well, but the cylinders look good (no gouges, specks are dust). Not sure how worn they are until i can mic them

[ATTACH=full]16549[/ATTACH]

[ATTACH=full]16550[/ATTACH]

[QUOTE="TomU, post: 479745, member: 7984"] The main issues are low compression on the right cylinder, melted wiring, and frozen front caliper and MC. Not sure about the gearbox. Pulled the head off (which was somewhat easier than the oil tank/horn, but not by much). I fear putting it back won't be near as easy Carbon fouled... [ATTACH type="full" alt="IMG_1480sm.jpg"]16547[/ATTACH] Gasket looks ok [ATTACH type="full" alt="IMG_1501sm.jpg"]16548[/ATTACH] Pistons are fouled as well, but the cylinders look good (no gouges, specks are dust). Not sure how worn they are until i can mic them [ATTACH type="full" alt="IMG_1493sm.jpg"]16549[/ATTACH] [ATTACH type="full" alt="IMG_1497sm.jpg"]16550[/ATTACH] [/QUOTE]