mk3 oil tank breather

Status
Not open for further replies.

mark375850

Joined
Nov 2, 2011
Messages
41
Country flag
Can someone tell me the correct way the breather from the oil tank to the aircleaner is routed and is the line to the balance pipe on carbs coming out of the bottom or top of the junction that goes into air box,should have mentioned this is a Canadian mk3 with original airbox,if possible a photo with battery side sidecover removed would be great.
cheers barry
 
Thanks LAB for that reply,but my problem is actually getting the breather from oil tank to the airbox connection without it either being bent so tight so it can pass behind airbox that it would restrict airflow or passing over airbox on primary side which interferes with my sidecover,I am using an interstate tank and sidecovers,I know there are two sizes of interstate tank( I have a friend with a larger interstate tank but his is not a mk3 so airbox is different) maybe this is the wrong size for my mark3 because there is not enough clearance between my airbox and tank for return line to pass over airbox.
cheers Barry
 
Here's the only photo I could find.
norbsa48503 said:
mk3 oil tank breather
Click to expand...
 
Thanks again LAB that helps heaps will still have to modify my sidecovers but thy are only fiberglass reproductions,where pipe passes behind deuss fastner it gets a bit busy on my bike ,tank and side cover are pretty close but a bit of modification of sidecover will let it pass.
thanks again for your help Barry
 
Status
Not open for further replies.
Back
Top