Funny how things escalate
I fitted a hydraulic clutch conversion to my rocket 3 and found i had very little thread left to get the adjuster nuts on the end of the pull rod
And it felt to me that it was loading the clutch bearing,so I decided to strip the clutch out to take a look at the plate
The plate is only 5.8mm thick so needs to be replaced plus I want to change the clutch basket for one I've fitted a starter ring to
Then I thought whilst I'm this far in I might aswel fit a 5 speed box so I stripped the gear cluster out ready
Then I thought I've got a bit more access to the frame around the swinging arm pivot where they are prone to cracking on an OIF
So it was off with back wheel/swinging arm/rear mudguard to gain proper access!!!
