J JimP MEMBER Joined Feb 2008 Messages 36 Feb 23, 2008 #1 Hello, Norton Technical Data in workshop manual says: -> Kick Start spindle bush fitted I.D.: 0.675/0.673 in. But the engaging end of my layshaft is 0.683" diameter! Is anyone aware of a corrected value? Ref: [Broken Link Removed]
Hello, Norton Technical Data in workshop manual says: -> Kick Start spindle bush fitted I.D.: 0.675/0.673 in. But the engaging end of my layshaft is 0.683" diameter! Is anyone aware of a corrected value? Ref: [Broken Link Removed]
L.A.B. FULL MEMBER Joined Nov 2004 Messages 21,495 Feb 23, 2008 #2 It is a misprint! For Kickstart spindle bush fitted I.D. = read the information given at Layshaft Bush I.D. - and vice versa. This was corrected in later factory manuals, however the Haynes Commando manual also contains the same mistake!
It is a misprint! For Kickstart spindle bush fitted I.D. = read the information given at Layshaft Bush I.D. - and vice versa. This was corrected in later factory manuals, however the Haynes Commando manual also contains the same mistake!
