FULLY FLOATING brake disc

Regarding : FULLY FLOATING CLOSE GRAINED CAST IRON 12" RACING DISC , RGM part no. 050015

Can I use this brake disc with my standard brake caliper ?
And 13 mm master .

Michael

Not without modification as at least the mounting will need changing to suit the bigger diameter, give Roger a ring and he can advise whats needed.

RGM sell a mounting plate for use with this disk and a Lockheed CP2696 caliper. I chose not to use it since it's slotted for use with different sized disks. I made up my own adaptor from a lump of sheet alloy - not too hard to do once you have the hole placing worked out.

It may be possible to use the standard Norton caliper, but I did not try this - dont like it

/Steve in Copenhagen.

I went with the full Grimica set up 12" disc, Master cylinder, calapar and S/S brake line, very happy with this set up and has been on the bike for over 5 years now and very light work with the fingers on the lever.

Ashley