Front Brake Disc/Rotor Torque Spec

Thought I had locate this information before but can't remember where or how. I took off my rotor/disc to clean it up, repaint it and put in a set of new AP Brake pads. I need the torque specifications for the 5 nuts that hold the rotor onto the front hub. If my memory serves me right, it is 25 ft lbs. But, at my age and after as many barley pops I have consumed over those years, I refuse to rely on my memory!

http://britmoto.com/manuals/Manuals/750_man.pdf (pdf p. 18)

"Disc-to-hub nuts 20 ft./lb."

there's a good list on the old britts tech too