frame changes?

coomo · Nov 13, 2018

Guys.I want to install R&G bobbins on my 2018 961.R&G will only stipulate fit to 2015.Im pretty sure frame hasnt changed since then.Am I right? thanks.

TonyA · Nov 14, 2018

Look at the underside of your swing arm near , just in front of the rear wheel axle. you should see a threaded boss , with 6mm threads. As far as I know all the 961's should have these mountings.

Fast Eddie · Nov 14, 2018

TonyA said:
Look at the underside of your swing arm near , just in front of the rear wheel axle. you should see a threaded boss , with 6mm threads. As far as I know all the 961's should have these mountings.

Can’t mount bobbins there Tony, not unless he removes the exhaust pipes !

Rob Jameson - Norton UK · Nov 14, 2018

I think he may be referring to crash bobbins, not paddock stand bobbins. In which case, where it mounts hasn't altered.

If you do have paddock stand bobbins fitted, it is a good point that you will need to remove them before riding the bike.

TonyA · Nov 14, 2018

Hello Guys , I thought he was referring to the paddock stand mounts. There are styles out now that clear the Norton exhaust . You must get the narrow type. I used a straight edge ruler to check for the clearance. I can post pictures of how I measure it.

coomo · Nov 14, 2018

TonyA said:
View attachment 7402 View attachment 7403 View attachment 7403 View attachment 7404 Hello Guys , I thought he was referring to the paddock stand mounts. There are styles out now that clear the Norton exhaust . You must get the narrow type. I used a straight edge ruler to check for the clearance. I can post pictures of how I measure it.

thanks.I was refering to crash bobbins not paddock stands variety.I already have them supplied with bike/stand.

frame changes?

coomo

TonyA

Fast Eddie

Rob Jameson - Norton UK

TonyA

coomo

Similar threads