Fit the gearbox in place

pierodn

Joined
Nov 10, 2012
Messages
3,154
Country flag
Hi.
I am going to fit the gearbox in place.
A question, please.
The up and bottom fixing studs, have only two internal spacers that go only to the timing side, or four that go both side?.
Thank you.
Piero
 
I seem to recall same as Commando, one spacer and the rest of the fixing points are thickened / welded to the mount plates.

It has been years, so the recollection is foggy...

Photos from my thread don't help because engine and transmission were essentially in one lump.
 
By memory, I can only recall one spacer, timing side upper. I guess their could be one lower, but not four.
Mike B.
 
One spacer each (P/N 030250) fitted between the timing side rear engine plate and the top and bottom gearbox mounting lugs.
 
Ron L said:
One spacer each (P/N 030250) fitted between the timing side rear engine plate and the top and bottom gearbox mounting lugs.
Click to expand...
You got it. OD 1" x .156" x 7/16" bore.
Cheers,
Thomas
 
You must log in or register to reply here.
Back
Top