- Joined
- Aug 5, 2017
- Messages
- 1,401
Hi all
On the inside of the headlamp bezel are two tabs or fingers, I first thought these would sit either side of the clamp plate.... but there off to one Side so clearly aren't for that
It also looks odd as the rivet that mounts them is also sitting to one side
Checking on AN it clearly shows that the bottom locating lug isn't sitting 180 degrees opposite the mounting rivet
What are these fingers for as I can see no use for them? And why isn't the rivet at to centre directly opposite the lower lug
https://andover-norton.co.uk/en/shop-details/17826/headlamp-rim-7-553248-
On the inside of the headlamp bezel are two tabs or fingers, I first thought these would sit either side of the clamp plate.... but there off to one Side so clearly aren't for that
It also looks odd as the rivet that mounts them is also sitting to one side
Checking on AN it clearly shows that the bottom locating lug isn't sitting 180 degrees opposite the mounting rivet
What are these fingers for as I can see no use for them? And why isn't the rivet at to centre directly opposite the lower lug
https://andover-norton.co.uk/en/shop-details/17826/headlamp-rim-7-553248-