Reply to thread

The original bullets were pretty good, but the connectors are thin and tend to crack over time as you said.  Replacing the connectors with new from http://www.britishwiring.com/category-s/266.htm will go a long way to solving problems.  There may be other suppliers but that's who I use.


New connectors and new bullets are quite hard to plug in and make a much better connection - the connectors are heavier metal and tighter than the original.

The original bullets work fine with them.  I don't bother with dielectric grease, but it is a very good idea if using anything but new connectors and bullets and  it certainly wouldn't hurt with new.


Back
Top