madass140
VIP MEMBER
- Joined
- Nov 6, 2011
- Messages
- 2,126
The Electrexworld alternator/ign unit for Nortons has a single yellow wire coming from
the reg/rec putting out 12v AC for lighting. Not much good if using LED's.
My question is how to convert this single output wire to 12v DC? normally you would
convert using a rectifier etc connecting the 2 AC alternator output wires.
Electrexworld are not replying to my emails which is a bit disappointing.
the reg/rec putting out 12v AC for lighting. Not much good if using LED's.
My question is how to convert this single output wire to 12v DC? normally you would
convert using a rectifier etc connecting the 2 AC alternator output wires.
Electrexworld are not replying to my emails which is a bit disappointing.