Tornado
VIP MEMBER
- Joined
- Dec 5, 2017
- Messages
- 4,532
Noticed my steel left side cover on my '74 MKII 850 is touching the forward frame rail at its forward edge, The support bracket where the Dzsus fitting attached is also in contact with the frame. Whole panel is free to rattle about along that frame when Dzsus is attached. Should there be some sort of rubber grommet or spacer under the support bracket, or with the Dzsus passing through? Can't see any such thing on the AN schematics for the frame:
https://andover-norton.co.uk/en/shop-drawing/69/frame-swinging-arm-suspension-units
The Side cover schematics only show the rearward frame grommets...which I have already:
https://andover-norton.co.uk/en/shop-drawing/113/side-covers-accessory-cover
https://andover-norton.co.uk/en/shop-drawing/69/frame-swinging-arm-suspension-units
The Side cover schematics only show the rearward frame grommets...which I have already:
https://andover-norton.co.uk/en/shop-drawing/113/side-covers-accessory-cover