storm42
VIP MEMBER
- Joined
- Jul 20, 2011
- Messages
- 1,220
I have changed a few discs in my time and without exception the disc center holes have all been a good fit on the hub shoulder, this is something that I have never thought about, just accepted.
I now have a disc that has a 2 1/8" hole diameter but the hub it is going on is 2".
Is this a problem ?
The stud holes line up fine.
I now have a disc that has a 2 1/8" hole diameter but the hub it is going on is 2".
Is this a problem ?
The stud holes line up fine.
Last edited: