Diamond in the rough...

B

bwolfie

Joined

Sep 21, 2010

Messages

3,289

• Sep 25, 2012

• #1

I have been slowly purchasing bits to make my Dunstall project more sale able. I picked up an inner and outer primary last week.

The Before

The after

 

R

Rohan

Joined

Aug 26, 2010

Messages

8,215

• Sep 25, 2012

• #2

So is this related to this ?

http://cgi.ebay.com/ebaymotors/1970-Nor ... 0910494293

I don't know why, but I find that image of the cylinders floating in mid-air rather scary ?!

Is that one of Dons finned rear brake plates ?

 

B

bwolfie

Joined

Sep 21, 2010

Messages

3,289

• Sep 25, 2012

• #3

Yes and yes.

 

Hobot

Joined

Oct 19, 2005

Messages

18,978

• Sep 25, 2012

• #4

hehe Brent I was just about to post you had your work cut out on polishing till scrolling made me stop short. Pretty decent job, hope you neck muscle eased up by now.

 

B

bwolfie

Joined

Sep 21, 2010

Messages

3,289

• Sep 26, 2012

• #5

It only took about an hour to bring up the shine. I could probably hit the pitted area with the TIG welder, but that might only make it worse. I have welded a few primaries, and the cast aluminum welds nice, but traps impurities.

The neck and shoulder pain is mostly gone, just a little there to remind me.