crankcase breather

Anybody fitted the crankcase breather in the sump plug that was displayed on here about a year ago?
I've lost the installation instructions that came with the item.
Sorry, but I keep getting the two Jims mixed up, Jim Comstock & Jim Schmidt, but I believe it was made by the former.
If anybody has the leaflet, could they please scan it & post to the forum.
Much appreciated.

I don't have a scanner and don't know where the leaflet is.... But If it's the Jim Comstock one all you need to do is remove the top and adjust it so the hose clears any obstruction.

Also a non silicon sealant is suggested to seal the top to bottom. There's really not much to the thing, its just a sump plug with a breather attached. The original breather hose to the case on my bike was to the front left and so I removed that hose and re routed it to the sump breather. Then I placed a bolt to block off the timed breather on the case.