CNW Crankcase Breather Gasket

cNw said:

You do not have the ‘get the bolts out’ to remove the breather body.

Fact is that the screw threads only extend a small amount from the breather body so if you have that assembly already together (breather body, valves and 4 screws), then you just slide in place and tighten up. In other words, if you have 1/4’’ of space between the hex head and gear box, you have enough room to remove and install it.

Click to expand...

Didn't think about that, but will definitely be challenging getting the inner screw out with the body in place especially if it's loctited

TomU said:

Didn't think about that, but will definitely be challenging getting the inner screw out with the body in place especially if it's loctited

Click to expand...

Doesn't look as if that is where your leak is from, so you should be able to leave the inner plate in place!

Ask and you shall receive !

Nice Gaskets ?....we have Nice Gaskets !! Just opened a box with a few hundred fresh, die cut gaskets for the cNw breather bodies.

Looked for and found a small company in California. Owner/operator got right on it and in a matter of a few weeks delivered a really nice quality product.

Few people have contacted me already about wanting some for their cNw breather kits but if anyone else does need a pair, just email me at the shop and I will send them right out.

nortonworks@fone.net

Thanks, Matt