- Joined
- Aug 5, 2017
- Messages
- 1,401
Hi Guys
I'm about to seal up the original oil way return hole from timing case into the crankcase and drill a new hole beside the oil pump.
I read that with a reed type breather fitted to the crankcase its advisable to block of breather holes between the two cases to improve operation of the reed breather
Does this include the drilling adjacent to camshaft bush which is where the thrust washer tab is located..... as I don't need to fit this washer?
Thanks
I'm about to seal up the original oil way return hole from timing case into the crankcase and drill a new hole beside the oil pump.
I read that with a reed type breather fitted to the crankcase its advisable to block of breather holes between the two cases to improve operation of the reed breather
Does this include the drilling adjacent to camshaft bush which is where the thrust washer tab is located..... as I don't need to fit this washer?
Thanks