Cover for Bottom of 1975 MKlll Ignition Panel

I am doing a restoration on a 1975 MKlll and the wires and connection on the bottom of instrument light and ignition switch are open to enviornment and unsightly. Has anyone seen a cover to go over the bottom and retain the factory panel. I am fabricatig one out of aluminum that will slide under and actually be held to original pc. It is functional but maybe an 8 out of 10 for looks!!!!!!

Anybody know of anything different other than CNW Stuff?

oppulent

If it works, I'd be interested in trying one on my MkIII

I used the rubber boot from Old Britts that covers the ignition switch wires :
http://www.oldbritts.com/1975_g32.html

Part # 36

The rest of the wires are tucked up in the console
Pete

Deets55 said:

I used the rubber boot from Old Britts that covers the ignition switch wires :
http://www.oldbritts.com/1975_g32.html

Part # 36

The rest of the wires are tucked up in the console
Pete

Click to expand...

My MKIII doesn't even have the rubber boot , so I would be interested in seeing how your cover turns out Oppulent

cjandme said:

Deets55 said:

I used the rubber boot from Old Britts that covers the ignition switch wires :
http://www.oldbritts.com/1975_g32.html

Part # 36

The rest of the wires are tucked up in the console
Pete

Click to expand...

My MKIII doesn't even have the rubber boot , so I would be interested in seeing how your cover turns out Oppulent

Click to expand...

Neither does mine ,also interested what you come up with. Always thought it would be too easy for ne'er-do-wells to access the wiring in there anyway